AC Repair in Brunswick County: How to Fix 3 Common Problems
When your AC stops working on a hot day, you need fast, reliable service. At Brunswick Isles HVAC, we specialize in AC repair in Brunswick County, helping homeowners get their cooling systems back up and running quickly.
If your air conditioner isn’t working properly, don’t worry—some common issues can be diagnosed easily. Below, we’ll walk you through a few troubleshooting steps and explain when it’s time to call a professional.
Air Conditioner Repair Checklist
1. AC Won’t Turn On
If your AC isn’t responding, try these quick checks before calling for repairs:
Overloaded Circuit Breaker
One of the most common reasons an air conditioner stops working is a tripped circuit breaker. Here’s how to handle it:
- Check the Electrical Panel – Locate your home’s electrical panel and see if the AC breaker has switched to the “off” position. If so, reset it by flipping it back to “on.”
- Monitor for Recurring Trips – If the breaker trips again shortly after resetting, this could indicate an underlying issue such as an overloaded circuit, faulty wiring, or a malfunctioning AC component.
- Avoid Overloading the Circuit – Running multiple high-power appliances on the same circuit as your AC can cause excessive power draw. Try unplugging other devices and resetting the breaker again.
- Call a Professional if Needed – If the breaker continues to trip, there may be a more serious electrical issue, such as a short circuit, failing capacitor, or motor problems. A licensed HVAC technician can safely diagnose and repair the problem.
Incorrect Thermostat Settings
One of the first things to check is the thermostat. Ensure it is set to “cool” mode and that the temperature is set lower than the room’s current temperature. If the thermostat is accidentally set to “heat” or “fan-only” mode, the AC won’t function as expected.
Additionally, if your thermostat is unresponsive or the display is blank, the batteries may be dead. Replace them and restart the thermostat to see if the issue resolves. If the thermostat still doesn’t work, there may be a wiring issue, or it could need recalibration. In that case, professional servicing may be necessary.
Shut-Down Switch Activated
Many air conditioning units come with a built-in safety shut-off switch designed to protect the system from damage. If your AC isn’t turning on, this switch may have been triggered due to overheating, electrical issues, or maintenance needs.
To check if the shut-down switch is the problem, locate the reset switch on the indoor or outdoor unit. If it has been activated, reset it by pressing the button or flipping the switch back on. However, if the switch keeps shutting off repeatedly, it could indicate an underlying issue like a clogged air filter, a refrigerant leak, or an electrical fault that requires professional attention.
Clogged Condensate Drain Pan
The condensate drain pan collects excess moisture from your AC system. If it becomes clogged, water can back up and trigger the system’s safety shutdown.
A blocked drain line or debris buildup is often the cause. Try using a drain-cleaning tablet or flushing the line with vinegar to clear minor clogs. If your system has a float switch, check if it’s triggered—this may indicate a pump failure requiring replacement.
For persistent issues, professional service may be needed to prevent water damage and maintain AC efficiency.
2. AC Blows Warm Air
If your AC is running but not cooling, here’s what to check:
Blocked Airflow
Dirty filters or blocked vents can reduce airflow. Change your filter and ensure all vents are open.
Low Refrigerant Levels
If your system is low on refrigerant, it likely has a leak. Only a professional can safely recharge the refrigerant.
Dirty Outdoor Unit
A clogged condenser coil can prevent your AC from cooling efficiently. Cleaning the unit may help, but if the problem persists, it may need professional servicing.
🔧 Still blowing warm air? Call us for professional AC repair in Brunswick County!
3. AC Isn’t Blowing Enough Air
If your AC is on but the airflow feels weak, check the following:
Weak airflow from your air conditioner can make cooling inefficient and uncomfortable. This issue is often caused by blockages, dirty components, or ductwork problems.
Check the Air Filter – A clogged filter restricts airflow. Replace it if it’s dirty.
Inspect the Ductwork – Blocked or disconnected ducts can limit airflow. Ensure they are clear and properly connected.
Examine the Blower Motor – If the fan isn’t running at full speed, it may need cleaning or repair.
If airflow remains weak, a professional inspection can help identify hidden duct issues or system malfunctions.
Request Pro Air Conditioner Repair Now
Whether your AC won’t turn on, is blowing warm air, or isn’t cooling properly, Brunswick Isles HVAC is here to help. Our expert technicians provide fast, reliable AC repair in Brunswick County to keep your home comfortable.
📞 Call us now or request service online!
Book Our Service
Need HVAC estimate? Fill out the form below, and our team will get back to you promptly.